-
400mm Wet & Dry Diamond Core Drill Hire
The Professional Choice
These 400mm wet and dry diamond core dills offer a powerful solution for a range of core drilling jobs on site, such as drilling channels for pipes, wires, electrical sockets, telecoms cables and ventilation systems. The heavy-duty diamond core drill and stand allow you to drill cores up to 400mm in diameter through materials such as concrete, brick, masonry, marble and steel.
The Husqvarna DM 340 diamond core drill included in this package is an extremely powerful, reliable and easy to use piece of core drilling equipment. This heavy-duty diamond core drill features a 3 speed motor, a water cooled gearbox and an LED indicator which shows the load of the machine and allows you to always drill at maximum pressure. These features combine to provide you with optimal drilling performance when working with tough materials. This drill also has Husqvarna’s Softstart feature, which uses an electronic current limiter to start the drill slowly when the trigger is pulled, and then increase the speed two seconds later. This ensures clean and accurate core drilling and helps to protect the drill from overloading. The DM 340 diamond core drill also has ‘Elgard’ - a feature that causes the drill to pulsate in order to alert the operator when it is becoming overloaded. If the load is not then reduced, the drill will shut off in order to protect itself. A chuck key, chuck adaptor, drift key, and pilot drill all come included with the Husqvarna DM 340 Diamond Core Drill hire.
The Husqvarna DS 450 drill stand that comes included in this package is a sturdy, strong and reliable piece of equipment that allows you to complete a range of challenging core drilling jobs to the highest professional standards. This diamond core drill stand is simple to set up; it is designed to hold the drill motor firmly in place so that you can complete core drilling jobs accurately, precisely and consistently. The drill stand allows for angled drilling, from 90 degrees to 60 degrees, and it can be used vertically or horizontally. This means that it can be set up to drill into walls, floors or ceilings. The Husqvarna DS 450 drill stand can also be used for stitch drilling - so you can drill multiple holes next to each other to make openings. This professional diamond core drill stand features an integrated vacuum base, which allows you to connect a dust removal vacuum unit very easily. This improves safety on site and reduces the mess created when drilling.
-
Rated Input Power 3.3kW Maximum Drill Bit Diameter 400m Sound Power Level, Guaranteed (LWA) 113dB(A) Sound Power Level, Measured 112dB(A) Sound Pressure Level at Operators Ear 98dB(A) Number of Gearbox Speeds 3 Water Connector G 1 / 4" Length 505mm Width 142mm Based On Husqvarna DS 450 Drill Stand Maximum Drill Bit Diameter 450mm Maximum Drill Bit Length with Recommended Drill Motor 698mm Maximum Travel Length 635mm Stand Length 444mm Stand Width 266mm Stand Height 1175mm Stand Weight 23.3g Please note: This product description and specification is based on the model most widely stocked across our network of partner stores. Alternative brands of equivalent specification may be supplied based on location and availability.
-
Most Popular
152mm Dry Diamond Core Drill
Cuts Large Diameter Holes In Surfaces
- Ergonomic Handles
- 13mm Keyed Chuck
- Variable Speed Adjustment
- 110v Power Supply
- Ergonomic Handles
- 13mm Keyed Chuck
- Variable Speed Adjustment
- 110v Power Supply
from £44.53DIY & TradeSave 47%
FREE Delivery: Nationwide
Click & Collect: 730 Locations150mm Wet & Dry Diamond Core Drill
Cuts Large Diameter Holes In Surfaces
- 360° Adjustable Handle
- Drilling Guide
- Overload Protection
- Soft Start
- Diamond Core Bit Sold Separately
- 360° Adjustable Handle
- Drilling Guide
- Overload Protection
- Soft Start
- Diamond Core Bit Sold Separately
from £101.87DIY & TradeSave 65%
FREE Delivery: Nationwide